“AutoKrAZ” shipped a batch of special vehicles based on various KrAZ chassis and executed its contractual obligations towards ”Ukrnafta” according to tender conditions. The АTsNG8-6322, АTsNG-10-63221 and АTsNG-10-65053 tank trucks went to subsidiaries of “Ukrnafta” in Ivano-Frankovsk region (NGDU “Nadvirnanaftogaz”) and Poltava (NGDU “Poltavanaftogaz”).
8 and 10 cu.m. tanks made by “45th Experimental Mechanical Plant”, a part of SC “Ukroboronprom”, are used for transportation of liquefied loads (except alkalis and corrosive liquids) with density of 0,85 - 1,35 g/cm3. 8 cu.m. tank is based on the 6х6 KrAZ-6322, while 10 cu.m. tanks are based on the 6х4 KrAZ-65053 and 6х6 KrAZ-63221 chassis. The vehicles have the same equipment set: Euro-5 engine rated at 375hp, additionally, digital tachograph, SPTA set with first aid kit, warning triangle, fire extinguisher, jack and wheel chokes.
Single-compartment tanks have inner oil-and-gasoline resistant antistatic coating. Material: 5 mm thick steel 3СП2. At the rear there is a filler with 500 mm manhole, stiffening ribs, sediment tank, vapor port, antislip coating on a catwalk, ladders, two compartments for hose storage, toolbox and other accessories and equipment. Centrifugal pump with output of 29,2 m3/h is driven by transfer case flange through propeller shaft. Equipment includes two 4 m long hoses.
“Ukrnafta” traditionally purchases from domestic manufacturer “AutoKrAZ” various special vehicles; most are AWD models with excellent performance. Kremenchug Automobile Plant hopes to develop partnership with the largest oil and gas company of Ukraine.
